Element Technica offer a wide range of add-ons and improvements for the Red Digital Cinema Camera system as well as the Mantis - the industry's most configurable and innovative hand-held shoulder mounting system for film & digital motion picture cameras.

VIDEO BREK OUT BOX

This video break-out box converts the RED One's mini-coax connectors to industry standard HD-SDI BNC connectors in a tough, securely mounted package. It is low-profile and routes video to the rear and gen-lock toward the bottom. The chromed knob at the center of the unit actuates the four push/pull locking connectors simultaneously for easy installation and removal. The camera-hugging tab at the bottom utilizes one of the camera body's mounting holes for added security.

As far as the functionality of the breakout box, the idea is to install it and leave it in place until you have a reason to access the original connectors. We did not conceive of it as a macro connector for the 4 signals. The stock connectors are high quality and high bandwidth commercial RF connectors. They are typically chosen when signal integrity and space are guiding requirements. Like most high quality RF connectors these were designed to survive at least 500 mating cycles just like most HD SDI BNC connectors break-out. This unit makes it possible to eat up the available mating cycles on an easily (and inexpensively) repaired component rather than on the camera itself. Had RED selected PCB mounted BNC connectors in the same place and orientation as the minis, we likely would have still built the break-out box if for no other reason than to take the stress off of the camera's connectors and to re-route the cable toward the rear. The right side of the camera has a huge amount of Input/Output (I/O) going on. The current configuration makes the camera as slim as is physically possible while still offering the I/O options.

EVF MOUNT

The EVF Mounting System provides a secure mounting interface on either style of top bracket as well as 4" of vertical adjustment and 6" of telescoping adjustment along the viewfinder axis. In addition to the linear adjustment, it also provides a rugged clutch that allows the viewfinder to be tilted to almost any angle. It will stay where you put it regardless of shooting environment. All adjustments including clutch drag are easily adjusted on-the-fly without tools.

***NOTE***
When the Element EVF tube mount is being used, the Element Handle Risers are required for using the RED Handle Extension. The Red Handle can be used in conjunction with the tube mount without the risers but the handle extension cannot be used.

V-DOCK™ DRIVE MOUNT KIT

Element Technica has created an accessory mounting system by combining the ubiquitous V-Lock and our innovative SpeedyClamp™ to make the V-DOCK™ to be used with the ISO-Plate. This combination allows you to greatly expand the kind of shooting conditions for the RED DRIVE by eliminating dropped frames in all but the most severe conditions. It can be easily converted to a rigid mount for the RED RAM by substituting the individual shocks for stainless fasteners.

For those users wanting to use multiple drives with a single ISO-Plate we offer the INDIE-Pack, consisting of one V-DOCK, one ISO-Plate and a set of nylon tipped thumb screws (Red Drive not included)

MANTIS HAND HELD RIG

Mantis Explained PDF / Mantis Configuration Notes PDF

The industry's most configurable and innovative shoulder mounting solution for film and digital motion picture cameras. Fully compatible with the RED One of today, as well as the Scarlett and Epic of tomorrow. Element Technica's new hand-held system combines innovative design with exceptional workmanship and materials.

Mantis Features:

• Dovetail interface allows quick setup; 20 seconds from tripod to hand held
• Multi axis adjustment allows shoulder pad to conform to any shoulder
• Two axis (rotational) adjustment shoulder pad
• Fore/aft linear adjustment shoulder pad
• Designed specifically for Arriflex style bridge plates (435, Arricam, Moviecam, Phantom, etc.)
• Utilizes conventional bicycle grips (use ours or bring your own)
• Telescopic and rotating handle extensions
• Handles and extensions use Arriflex compatible rosettes
• Mounting point for ViewFactor Origo remote start/stop button
• Available as a system or a la carte
• RED One owners will need the ET Arri-Style Base from RED.com or similar Arri compatible bridge plate.

Element Technica's Mantis rig is available in Australia from Lemac Sales. Have a look at the demo video shot by Lemac above for a more in-depth description of the product.

CLICK TO VIEW THE ELEMENT TECHNICA NAB 2009 QT or view it as a Windows Media File

EVF Guard

This easy to install protective cover will help prevent accidentally pressing the buttons and rotary dial on the EVF. As with all Element Products, it is precision machined from aircraft grade aluminum and anodized.

Product Includes: 4 x Machined Standoffs, EVF Guard Plate, and 4 x stainless steel screws.

HYBRID BRIDGE PLATE (Available in either 15mm or 19mm configurations)

The 15mm &19mm Studio Hybrid Kit replaces the Arri-Style Base on the RED One and includes the Hybrid Body Core and two Studio spacing clamps.

DOVETAIL PLATE

Element Technica offers an improved version of the Arri standard dovetail with a modified outside edge to match the top of the OConnor fluid head. This feature allows you to eliminate the OConnor Euro quick release plate thereby eliminating two extra interconnects while reducing the stack height and increasing the fore and aft. Element's Arri / OConnor style dovetail is compatible with our 15MM and 19MM Hybrid bridge plates as well as all other Arriflex standard bridge plates. Available in a variety of lengths (9", 12", 18", 24") and configurations.

LIGHTWEIGHT RODS

In an effort to develop our own carbon fiber rod solution we struggled with the high costs and functional limitations of carbon fiber. Element Technica has developed a unique, low-cost solution for weight conscious hand-held shooters. Our new Ultra-Light iris rods are made from seamless extruded aircraft grade aluminum. They are precision ground then finished with a durable nickel plating. The result is an iris rod with the low weight of aluminum but the surface durability and ease of operation of stainless steel. While they are strong enough for most zooms they weigh in at one third the weight of stainless. Competitively priced with standard stainless rods but a lot easier to carry around.

Weight Comparison:
- 15mm Stainless Steel, 12" length - 240 grams
- 15mm Ultra Rods, 12" length - 85 grams

Element Rods are available in both 15mm and 19mm sizes in 6", 8", 12", 15", 18" and 24" lengths

TOPSIDE COMBO

When two 15mm top mounts are sold with our cheese plate we refer to this as a Topside Combo and you save $160 off of their individual prices. These products together give you 15mm iris rod mounting while making a round camera flat. You also get the functionality of 1/4-20 threaded holes at RED spacing interspersed with 3/8-16 threaded holes at Arri spacing along the top.

CHEESE STICK

The Element Technica Cheese Stick is a top handle designed for the RED One Camera. It is precision machined from aircraft grade aluminum and attaches to Element Technica 15mm Top Mounts, or Red 19mm Top Mounts. The Cheese Stick has 1/4-20 and 3/8-16 holes running along the top, bottom, left, and right side to allow for mounting accessories, as well as providing mounting options for the camera itself. It also provides 2 inches of clearance between the bottom of the handle and the Cheeseplate to allow for a comfortable grip while carrying.

The Cheese Stick also features tubular clamps on both ends that can clamp onto a rod or any other accessory that has a 15mm or 19mm outer diameter. Each Cheese Stick comes with two 19mm to 15mm captive bushings that allow the clamps to be used with 15mm accessories with the bushing, and 19mm accessories without the bushing. This would allow for mounting lens drive motors, monitor quick release spuds, and a number of other accessories.

View the Element Technica RED ACCESSORIES PDF

View the TECHNICA 3D PDF

View the Element Technica V-DOCK™ INFORMATION PDF

Info on Element Technica CAMERA SUPPORT PDF

Element Technica products are distributed in Australia by Lemac Sales - please contact us for more details.